Shenzhen CODT technology co.,Ltd
Create Our Dreams Together
Add to Cart
ATEX Certified explosion proof sensor for explosion proof lighting explosion proof light fitting
Ex nR IIC T6 Gc Only EX-IN02-A
Ex eb nR IIC T6 Gc Only EX-IN02-B and EX-IN02-C
Ex tb IIIC T80°C Db
| Model NO. | Ex-IN02-A/B/C-MS | MS: Motion sensor OS: Photocell Sensor MO: Motion sensor + Photocell sensor |
| Ex-IN02-A/B/C-OS | ||
| Ex-IN02-A/B/C-MO | ||
| Input | DC input voltage | N/A |
| Rated voltage | AC120-277V(Ex-IN02-A/B) AC120-347V(Ex-IN02-C) | |
| No-load power | N/A | |
| Stand-by power | ≤1.0W | |
| Surge test | N—L: 1kV | |
| Output | Working mode | ON/OFF 1 -10V dimming |
| Type of load | Inductive or resistive | |
| Load capacity | AC 120V 400W, AC220V AC220V-240V 800W AC 277V 1000W AC347V 1200W | |
| Current of load | N/A | |
| Max.surge capacity | 50A (50% Ipeak, twidth =500uS, 277Vac full load, cold start); 80A (50% Ipeak, twidth =200uS, 277Vac, full load, cold start | |
| Dim interface | 1-10V Dimming | < 50mA (Non-constant source) |
| Syn control | 0/5V | |
| High low voltage control | N/A | |
| PWM control | N/A | |
| Sensor Parameters | Operating frequency | 5.8 GHz ±75 Mhz, ISM band |
| Transmitting power | 0.5mW Max. | |
| Hold time | 5s/30s/90s/3min/20min/+∞ | |
| Stand-by dim Level | 10%/20%/30%/50% | |
| Stand-by Period | 0S/5S/5min/10min/30min/1h/+∞ | |
| Detection Area | 25%/50%/75%/100% | |
| Daylight Sensor | 2 lux/5Lux/10Lux/25Lux/ 50Lux/100Lux/Disable | |
| Mounting height | Suggest:3-10m support 12m Max | |
| Detecting Angle | 150°(Wall mounting) 360°(Ceiling mounting) | |
| Operating Environment | Operating Temperature | -30℃~60℃ |
| Storage Temperature | -40℃~80℃ | |
| Others | Wiring | Press-in terminals Wire diameter: 0.75-1.5mm |
| IP | IP 65 | |
| Protection Class | Class II | |
| Installation | Built-in | |
| Life Time | 50,000 hours |
Note 1. “N/A”means not available.
2. Detection area is effected on volume of motion object and motion speed. The detection area is tested by a 165cm height person and walking speed is 0.5m/s.
Detection Area
|
| 1 | 2 | |
| I | ON | ON | 100% |
| II | ON | - | 75% |
| III | - | ON | 50% |
| IV | - | - | 10% |
Daylight Sensor
| 1 | 2 | 3 | 4 | ||
| I | - | - | ON | ON | 2 lux |
| II | - | - | - | ON | 5 lux |
| III | - | ON | ON | - | 10 lux |
| IV | - | - | - | - | 25 lux |
| V | - | ON | - | - | 50 lux |
| VI | ON | - | - | - | 100 lux |
| VII | - | - | - | - | Disable |
Hold Time
| 3 | 4 | 5 | ||
| I | ON | ON | ON | 5 S |
| II | - | ON | ON | 30 S |
| III | ON | - | ON | 90 S |
| IV | - | - | ON | 3 min |
| V | ON | ON | - | 20 min |
| VI | - | - | - | ∞ |
Stand-by DIM Level
| 5 | 6 | ||
| I | ON | ON | 50% |
| II | - | ON | 30% |
| III | ON | - | 20% |
| IV | - | - | 10% |
Stand-by Period
| 6 | 7 | 8 | ||
| I | ON | ON | ON | 0 S |
| II | - | ON | ON | 5 S |
| III | ON | - | ON | 5 min |
| IV | - | - | ON | 10 min |
| V | ON | ON | - | 30 min |
| VI | - | ON | - | 1H |
| VII | - | - | - | ∞ |
Model IN02-A, IN02-B, and IN02-C are easy to operate and install, for it has independent junction box and terminals, which helps simplify on-site operation. The junction box is an increased safety type.
1. On-off function(Stand-by Period “0s”)
2. 2-step dimming function(Stand-by Period“+∞”)
3. 3-step dimming function(Stand-by Period“5s/5min/10min/30min/1h”)
Q1: Do you offer guarantee for the products?
A:Yes, we offer 2-5 years warranty to our products.
Q2. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.